| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
 |
CP205-MRS:
Compact and light
Plug and play capability greatly reduces time-to-market
Print speed up to 50 mm/s
Print text, graphics and barcode
Downlodable character set
Sofware programmable energy consumption
Single power supply
Full native and standard Windows drivers
Low cost
|
Download
Brochure |
                                  |
|
 |
ELM |
Download
Brochure |
|
|
 |
|
Download
Brochure |
|
|
 |
FM205-ELC
Easy loading cutter integrated
Ultra compact design
Ultra light
High resolution printing (8 dots/mm)
Low consumption
Print speed up to 75 mm/sÂ
Full electrostatic protection
Max voltage 8.5 Volts
Patented Easy Loading and Easy Door Opening System
|
Download
Brochure |
|
|
 |
CSM05 Chipset
Drives any APS 5V mechanisms
Easy hardware configuration
Wide power supply range (4V to 9.5V)
Printing speed up to 90 mm/s (depending on the printer mechanisms)
3 default communication ports:
RS232 TTL, General purpose parallel interface, I2C intererface.
|
Download
Brochure |
|
|
 |
HSP2500
60 or 62.5 paper width. Prints up to 200 mm/sec. Cuts up to 200 µm. 150 km printing life. 2 million cuts life. Full easy loading printer and cutter. Full & Partial cuts. Near straight paper path for thick paper printing. USB 2.0 and high-speed RS232. ESC/POSTM compatible. Ability to add external presenter and sensor control.
|
Download
Brochure |
|
|
 |
HSP3500
80 or 82.5 mm paper width. Prints up to 250 mm/s (10ips). Cuts up to 220 µm (10 mils). 150 km printing life. Full easy loading printing & cutter. 2 million cuts life. Full & partial cuts. Near straight paper path for thick paper printing. Non-sparking design for gasoline pumps. USB 2.0 and high-speed RS232. ESC/POSTM compatible. Ability to add external presenter and sensor control.
|
Download
Brochure |
|
|
 |
FCB500:
The FCB500 control board is a stand-alone control board primarily targeted at HSP3500, HSP2500 and corresponding kiosk mechanisms KM3500 and KM2500.
The FCB500 control board is able to drive a printer mechanism as well as a presenter mechanism at the same time. RS232, USB and Ethernet communication interfaces are available in standard.
Additionally, the FCB500 control board functionality can be extended thanks to the A.P.S standard extension port, enabling customers to directly drive simple sensors and actuators with little to zero extra electronics.
Â
|
|
|
|
